LG38

Simple semi-automatic control for drying chambers for wood drying

...

LG38 is a control system for the continuous measurement of wood moisture. With this system, it is possible to monitor and adjust the climate in the chamber. The system has up to 4 signal connections for the wood probes. The temperature regulation is conducted automatically by transmitting the wood moisture data to the control system.

 

The climate in the chamber is measured by 2 temperature sensors. These sensors use different technologies (Dry Bulb and Wet Bulb). The Wet Bulb Probe always needs to be supplied with moisture. This effect is achieved by soaking cotton fibers in water and wrapping them around the Wet Bulb Probe. This process is necessary to determine the difference between dry and wet and to calculate evaporation. This difference provides information about the humidity content in the chamber.

 

Optimal for:

  • Preferred use of the Wet/Dry Bulb system
  • Capability to place the control system near the chamber

LG38 has 5 relays for dampers, spraying, heating, and reversible fans. The LG38 control unit fits standardized control device recesses. It is a cost-effective solution for controlling and monitoring the drying cycle.

TECHNICAL DATA

  • 4 sensor inputs for wood probes
  • 2 inputs for temperature measurement (climate), Wet / Dry Bulb
  • 5 relay outputs for dampers, spraying, heating, and reversible ventilation
  • Temperature tolerance for operation: -10°C/50°C
  • Supply voltage: 130Vac (+/-20%), 50/60Hz
  • Device size: 144x72x152mm
  • Mounting opening: 134x66mm (145mm depth)

STANDARD SET:

  • 4 silicon-insulated cables for probes for wood moisture measurement (10m cable)
  • 2 temperature probes (4m cable)
  • 30 pcs. electrodes for different measurement depths (15mm, 25mm, 40mm)
  • User manual

Bitte füllen Sie dieses Formular aus, damit wir Sie zu Ihrer Anfrage kontaktieren können.

[formidable id=2]

Please fill out this form so we can contact you regarding your inquiry.

[formidable id=2]